Enterprise FTP Servers

Looking for a viable FTP solution with web functionality and enterprise grade feature-set.

Comments

Post a Comment

Popular posts from this blog

vCenter Server Appliance - Full Database Partition

Issues with your vCSA appliance locking up or crashing due to a full database volume?  Before you go too crazy looking at the database itself, or adding more space to the volume, see this bug. After upgrading to vCenter Server Appliance 5.5 Update 2, pg_log file reports this error: WARNING: there is already a transaction in progress (2092127) http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2092127 SSH into vCenter vcenter:/ # df -h Filesystem      Size  Used Avail Use% Mounted on /dev/sda3       9.8G  3.7G  5.6G  41% / udev            4.0G  108K  4.0G   1% /dev tmpfs           4.0G     0  4.0G   0% /dev/shm /dev/sda1   ...
Read more

Dell iDRAC 6 Update via SSH & TFTP

Below is syntax of racadm command to update iDRAC FW with TFTP Download the firmimg.d6 file and place it on your TFTP server. Connect to iDRAC via SSH and then run the appropriate command. racadm fwupdate -g -u -a < path > where path is the location on the TFTP server where the firmimg.d6 is stored including the TFTP server IP address Path: < TFTP Server IP > -d < Firmware image path on TFTP server > Case1: If firmimg.d6 image is in tftp root folder, path       racadm fwupdate -g -u -a < TFTP Server IP Address > Case2: If firmimg.d6 image is in sub folder of tftp root       racadm fwupdate -g -u -a < TFTP Server IP Address > -d < Sub folder Path >
Read more

XCP-NG / Xen Orchestra (XOA) HomeLab Setup

 First things first - these resources/documentation are quite helpful during the setup process, especially if you are coming from the VMware side and haven't used Xen in many years. https://xcp-ng.org/docs/ https://xen-orchestra.com/docs/ https://www.linuxhelp.com/add-additional-hard-disk-xenserver https://support.citrix.com/article/CTX121313 Default Credentials Default Web UI credentials are admin@admin.net / admin Default console/SSH credentials are xoa / xoa (first login) Set Static Network Login to the console and run: xoa network static Sudo/Admin Access To avoid typing sudo for any admin command, you can have a root shell with sudo -s Storage Management (Work in Progress) During install, pick the install disk and then (1) disk for an initial VM datastore. If you select multiple disks it will try to span the SR across them. Only select (1) if available, the others will need to be added from the console after the initial installation is complete. *STRONGLY* recommended to use E...
Read more